Migracija TFS 2008 na TFS 2010, treći dio, SharePoint Server 2007

Start the installation wizard for SharePoint Products. If you are installing Microsoft Office SharePoint Server 2007, type your product key, and click Continue.

On the Read the Microsoft Software License Terms page, read the agreement. If it is acceptable, select the I accept the terms of this agreement check box, and then click Continue.

On the Choose the installation you want page, click Advanced.

On the Server Type tab, perform one of the following steps:

If you are installing Windows SharePoint Services 3.0, click Web Front End.

If you are installing Microsoft Office SharePoint Server 2007, click Complete.

Click Install Now.

When the installation wizard finishes, a dialog box appears that prompts you to complete the configuration of your server. In that dialog box, verify that the Run the SharePoint Products and Technologies Configuration Wizard now check box is selected.
Click Close to start the configuration wizard.

On the Welcome to SharePoint Products and Technologies page, click Next. On the Connect to a server farm page, click No, I want to create a new server farm, and then click Next.

On the Specify Configuration Database Settings page, perform the following steps:

a. In Database server, type the name of the server that is running SQL Server and which you will use to host the databases for Team Foundation Server. If you will use a named instance, add its name after the name of the database server, separated by a slash (for example, MyDatabaseServer\MyInstanceName).

b. In Database name, type the name of the database that you want to use, or accept the default value.

c. Under Specify Database Access Account, in Username, type the name of the user account that you want to use as the service account for SharePoint Products (WSSSERVICE).

d. Under Specify Database Access Account, in Password, type the password for the service account.

e. After you specify all the required information, click Next.

On the Configure SharePoint Central Administration Web Application page, select he Specify port number check box, and type 17012.

Team Foundation Server uses this as the port number for the SharePoint Products
administration site. You can use any port number, but Team Foundation Server has always used 17012 as the port number for the SharePoint Products administration site.

In Configure Security Settings, click NTLM, and then click Next.

On the Completing the SharePoint Products and Technologies Configuration Wizard page, review the information, and then click Next.

On the Configuration Successful page, click Finish.

To configure services in Office SharePoint Server on the server that is running Microsoft Office SharePoint Server 2007, open SharePoint Central Administration.

Click the Operations tab, and under Topology and Services, click Services on
server.

In Select server role to display services you will need to start in the table below, click Single Server or Web Server for small server farms or Web server for medium server farms.

In Start services in the table below, find Excel Calculation Services, click Start, and then wait for the operation to complete.

In Start services in the table below, find Office SharePoint Server Search, and then click Start. The Configure Office SharePoint Server Search Service
Settings page opens.

In Query and Indexing, select the Use this server for indexing content and Use this server for serving search queries check boxes.

In Contact E-mail Address, type the address of an e-mail account to which external users should send mail about problems with this server.

In Farm Search Service Account, type the user name and password of a domain account to use as the Office SharePoint Server Search Service Account.

Leave the rest of the settings in their default configuration, click Start, and then wait for the operation to complete.

In Start services in the table below, find Windows SharePoint Services Search, and then click Start.

The Configure Windows SharePoint Services Search Service Settings page opens.

In Service Account, type the user name and password of a domain account to use as the service account.

In Content Access Account, type the user name and password of an account to use as the read-only access account.

Leave the rest of the settings in their default configuration, click Start, and then wait for the operation to complete.

After you enable the services that Team Foundation Server requires, you must create a shared service provider (SSP) for use with Team Foundation Server. You
will also create a SharePoint Web application to support this SSP.

To create a shared service provider and the Web application that it will use.

Click Home to display the main page for Central Administration, and then click Shared Services Administration.
On the Manage this Farm’s Shared Services page, click New SSP.
The New Shared Services Provider page appears.
In SSP Name, either type a name for the new SSP, or accept the default name.
The default name is SharedServices, followed immediately by a number (for example, SharedServices1).
Click Create a new Web application.
The Create New Web Application page appears.
In IIS Web site, click Create a new IIS Web site.
In Security Configuration, click NTLM, and then click Create a new application pool.
In Application Pool, configure the following options:
In Application pool name, ensure that the name matches the name in Description.
In the Select a security account for this application pool section, click Configurable, and then type the user name and password of the service account for SharePoint Products.
Leave the rest of the settings in their default configuration, and then click OK.
After the Web application is created, the New Shared Services Provider page appears with an error message in the title bar. This behavior is expected.
In SSP Name, in Web Application, verify that the name of the Web application that you just created for the SSP appears, and do not modify any default settings in this section.
In My Site Location, under My Site Location URL, in Relative URL, type a relative URL if a site already exists at /.This URL is required only if a site already exists at /. Users typically specify /My but you can specify any name that does not use prohibited characters.
Leave the rest of the settings in their default configuration, click OK, and then wait for the operation to complete. If a warning message appears about hosting the administration site for SSP and the root site on the same server, click OK.
On the Success page, click OK.

Configure Single Sign-On

To configure single sign-on, you must create an enterprise application definition. During the following procedure, you might need to log on with two sets of credentials. To successfully complete this procedure, the account with which you log on to the server that is running Microsoft Office SharePoint Server 2007 must meet the following requirements:

The account must be a domain user account. It cannot be a group account.
The account must be a member of the Farm Administrators group.
The account must be a member of the local Administrators group on the encryption-key server.
The account must be a member of the securityadmin and db_creator roles on the instance of SQL Server that will host the single sign-on database.
The account must be either the same account that is used as the Single Sign-On Administrator Account or a member of the group account that is used as the Single Sign-On Administrator Account.

To configure single sign-on

In SharePoint Central Administration, click the Operations tab.
Under Security Configuration, click Service accounts.
On the Service Accounts page, in the Credential Management section, click Windows service, and then click Single Sign-on Service from the list of services.
In the Select an account for this component section, click Configurable.
Type the user name and password of an account that you have configured to use as the sign-on account, and then click OK.
Click Start, click Administrative Tools, and then click Services.
In Services, right-click Microsoft Single Sign-On Service, and then click Properties.
On the General tab, in Startup type, click Automatic, click Start, and then click OK.
In SharePoint Central Administration, click the Operations tab.
Under Security Configuration, click Manage settings for single sign-on.
On the Manage Settings For Single Sign-On page, click Manage server settings. The Manage Server Settings for Single Sign-On page appears.
In Single Sign-on Administrator Account, type the user name and password of an account that you have configured to use as the sign-on account.
In Enterprise Application Definition Administrator Account, type the user name of the person or group of people whom you want to assign as the manager or managers of enterprise application definitions on this server.
You should consider creating and using a group that you will use for all members of the Team Foundation Administrators group.
Leave the rest of the settings in their default configuration, and then click OK.
On the Manage Settings For Single Sign-On page, click Manage encryption key.
On the Manage Encryption Key page, click Create Encryption Key.
On the Create Encryption Key page, click OK.
Return to the Manage Settings For Single Sign-On page.
Click Manage settings for the enterprise application definitions.
On the Manage Settings for the Enterprise Application Definitions page, click New Item. The Create an Enterprise Application Definition page
appears.
(Optional) In Application and Contact Information, in both Display name and Application name, type TFS. This step is not required, but it can be useful for convenience in later identification.
In E-mail address, type the e-mail address of the person or group whom you want to receive e-mail messages about this application.
In Account type, click Group.
In Authentication type, click Windows Authentication, and then click OK.
Return to the Manage Settings For Single Sign-On page, and then click Manage account information for enterprise application definitions.
The Manage Account Information for Enterprise Application Definitions page appears.
In the Account information section, in the Enterprise account definition list, click the name of the enterprise account definition that you created to support Team Foundation Server.
If you followed the suggested naming convention, the name will be TFS.
In Group account name, type the name of a global security group in the domain that contains all the users to whom you want to grant access to dashboards and reports in Team Foundation Server, and then click Set.
In Provide Server Account Information, type the name and password for the report reader account (referred to with the placeholder TFSReports), and then click OK.
On the Manage Account Information for Enterprise Application
Definitions page, click Done.

Add a Trusted File Location for Excel Services

For reports to operate correctly, you must also configure the Web application that you created for Team Foundation Server to use as a trusted file location for Excel Services.

To add a trusted file location

In SharePoint Central Administration, click Home to return to the home page for SharePoint Central Administration.
Under Shared Services Administration, click the name of the shared service provider that you created.
If you followed the suggested naming convention, this application will be called SharedServices1. The home page for administering the Web application opens.
Under Excel Services Settings, click Trusted file locations.
On the Trusted File Locations page, click Add trusted file location.
The Excel Services Add Trusted File Location page appears.
In Address, type the URL of the root site of the Web application that you will use with Team Foundation Server.
You should specify the Web application that you created in the Create a Web Application section.
In Location Type, click Windows SharePoint Services.
In Trust Children, select the Children trusted check box.
In the External Data section, under Allow External Data, click Trusted data connection libraries and embedded.
(Optional) Clear the Refresh Warning Enabled check box.
In Maximum Concurrent Queries Per Session, change the number to 20, make sure that the Refresh warning enabled check box is not selected, and then click OK.